Rezumat
CZU 621.9.048.4
DOI https://doi.org/10.5281/zenodo.2629554
Modern methods of electro-erosive dispersion of electrically conductive materials that use non-stationary forms of electrical discharges in fluid have low productivity. That is associated with long pauses of discharges. The objective of this research is to raise the productivity of obtaining metal powders. From a methodological point of view, a metal powder was obtained during in the process of research using an electric arc in the transverse hydrodynamic flow of the working fluid as a product of dispersion of specially prepared work-pieces and as a waste item (electrodes erosion products) of implementing the method of electric-arc treatment of two flat surfaces in the bipolar mode. During the research work, powders from the BT3-1 titanium alloy and the BK-15 hard alloy were obtained and investigated. The proposal was put forward on a possibility of their industrial use, especially for surface spraying. The high-performance methods and appliances were suggested to obtain metal powders using an electric arc in the transverse hydrodynamic flow of the working fluid that burns without a pause. They make it possible to increase dispersion productivity in a fixed-bed layer by an order of magnitude and more as compared with the electro-erosive dispersion, as well as to reduce the number of terminal process waste (i.e. electrodes) by 4 to 6 times.
Keywords: electric arc, hydrodynamic flow, metal powder, methods and appliances.