Rezumat
The analysis of an electroplasmolysis of biological raw material is lead(carried out, spent), the basic singularities of process in correlation with performances of a cell-like interchanging and requirement of sta- bilization of a potential on a membrane are secured (discharged). The measure(test) of a plasmolysis on a difference in phase between a current through capacity reactive and fissile environmental resistances is sub- mitted. Is shown, that the factor of ablation of a charge from a cell-like envelope by a current frames square- law intensifying of pressure in a cell resulting in to a plasmolysis. The bipropellant model is considered which parts a fluid fraction of raw material on two parts − inside and exocellular. The nature of model con- sists in unique exposition of transport phenomenas − electrical conductivity, thermal conduction or diffusion. On the establishment of model of raw material the parameters describing efficacy and intensification of transmission are deduced (removed). The basic analytical performances of process of transmission are well compounded with experimental datas in a wide gamut of the attitude amounting of raw material - fluid frac- tion and dry matters. On an example of process of an evaporation at concentration or drying of vegetative raw material the optimization on a minimum level of heat wastes surveyed.