MODELING OF LASER CLADDING WITH DIODE LASER ROBOTIZED SYSTEM
Vol. 46 No. 3 (2010), Content
Vol. 46 No. 3 (2010)

MODELING OF LASER CLADDING WITH DIODE LASER ROBOTIZED SYSTEM

Jianhua Yao
Research Center of Laser Processing Technology and Engineering, Zhejiang University of Technology, Hangzhou, P.R .China, laser@zjut.edu.cn
Kovalenko V.S.
Laser Technology Research Institute, National Technical University of Ukraine "KPI", Ukraine, 03056, Kyiv, Pobeda avenue 37, kovinvst@ntu-kpi.kiev.ua
Qunli Zhang
Research Center of Laser Processing Technology and Engineering, Zhejiang University of Technology, Hangzhou, P.R .China, laser@zjut.edu.cn
Anyakin Mykola
Laser Technology Research Institute, National Technical University of Ukraine "KPI", Ukraine, 03056, Kyiv, Pobeda avenue 37, kovinvst@ntu-kpi.kiev.ua
Xiaodong Hu
Research Center of Laser Processing Technology and Engineering, Zhejiang University of Technology, Hangzhou, P.R .China, laser@zjut.edu.cn
Weifu Wang
Research Center of Laser Processing Technology and Engineering, Zhejiang University of Technology, Hangzhou, P.R .China, laser@zjut.edu.cn

Abstract

The choice of proper working conditions is a problem for any processing. But for laser processing this procedure is much more serious. The final results of the processing are usually influenced by over 100 factors. So the best way to choose more cheaply and fast the working conditions is to use the processing simulation. Different tactics of this procedure is discussed and the statistical modeling is accepted. The actual model for laser cladding is developed based on the experimental results of steel cladding with diode laser robotized system. This model can be used to find the optimal working conditions for laser processing in practical use.

article_13 (Русский)